WIRING NEEDS WHEN USING LEDs CLICK HERE

Victory Vegas Rear LED Turn Signal Assembly

For our Vegas customers were proud to offer what is undeniably the best accessory available for this fine bike...our custom designed rear LED turn signal assembly.  After relocating the plate with one of our sidemounts this incredible piece is the second step in cleaning up the tail end.  Made from CNC machined aluminum and stainless steel with a powder coat for durability and utilizing 150 of the highest quality LEDs, this low profile unit directly bolts on to the stock tail’s mounting location and uses the stock wiring harness. Visibility is awesome and provides an additional safety benefit with it’s wraparound design. It’s so extremely low profile you won’t even know it’s there until you turn it on.  They are available in several color options including red tubing with red LED’s as shown below (a great compliment to the Vegas’ frenched in red taillight), or clear tubing with either amber or red LEDs.

 Movie requires Quick Time Player, click here for free download...

WIRING NEEDS WHEN USING LEDs CLICK HERE

Victory Vegas Front LED Turn Signal Assemblies

We’re now offering our Vegas customers the choice of two distinct and uniquely different front LED turn signals for their bikes that finish off the clean look afforded by our rear LED turn signal and sidemount. Our newly redesigned bracket style is made from highly polished billet aluminum (you’ll swear it’s chrome) and uses 15 of the highest quality amber  LEDs per side, and directly bolts on to the headlight bucket mounting bolt. It completely covers and cleans up the bottom of the triple tree (Please see installation note below).  Our second style wraps around the entire fork using industrial strength tape adhesive (in the location of your choice) and uses 45 amber LEDs per side.  Both turn signals use the stock wiring harness.  The purchase of a flasher module or load equalizer (depending on model year) sold separately  is required to maintain the stock flash rate and use of the four-way flashers.  Both units are very low profile (you won’t even know they’re there until you turn it on) and are available only in amber LEDs with clear tubing.

NEW!

	Vegas Front Wrap-Around Style LED Turn Signal Assembly    WRAP AROUND

PURCHASE THESE ITEMS AND MORE ON OUR NEW WEBSITE

 WWW.VICTORYONLY.COM

• The installation of the front wrap-around style LED turn signals should be considered a permanent modification.  Once the glue on the adhesive sets it is very difficult to remove the turn signals without damaging or breaking the LEDs or leaving residue on the fork tubes. If you’re considering any future front-end modifications (chroming, etc.) the installation of these turn signals should be done last.
• The installation of the new bracket style Vegas front LED turn signal on ‘03 Vegas requires the removal and reinstallation of the front brake line.
•  contact us us for availability before ordering.
• These products are not DOT approved. Use at your own risk, we are not responsible for any damages or losses incurred while using our products.
• Use of these products may be limited, regulated or prohibited in your state, please check all applicable motor vehicle code and laws before ordering.

Standard Victory Sidemounts