Installation Instructions for Bullet Light Mounts:
READ COMPLETELY BEFORE BEGINNING INSTALLATION
1) The light mounts are installed on the headlight mounting bracket as follows.
2) It is easiest to have the bullet lights already mounted to the brackets.
3) Remove the headlight shell from the mount completely and loosen the
headlight bracket bolt on the underside of the lower tree.
4) Now rotate the headlight bracket 180 Degrees (this will move the headlight
forward).
5) Using the new longer bolt supplied in the kit locate the new light brackets
and headlight and reassemble onto headlight bracket. (NOTE) the cut outs on
the top side of signal brackets are clearance for the headlight.
6) Now adjust headlight and single brackets and tighten all hardware.
7) Wire the lights per the light manufactures instructions. (NOTE) Lights
shown on bike are Kuryakyn Lights (Part #: KUR-2305, we had to run a separate
ground wire for these).